This information shall be sufficient to allow the master to determine in all reasonable loading conditions the heeling moments due to grain shift calculated in accordance with Part B of this Chapter. It shall include the following:
| (a) | Information which shall be approved by the Administration or by a Contracting Government on behalf of the Administration: |
| (i) | Curves or tables of grain heeling moments for every compartment, filled or partly filled, or combination thereof, including the effects of temporary fittings; |
| (ii) | tables of maximum permissible heeling moments or other information sufficient to allow the master to demonstrate compliance with the requirements of paragraph (c) of Regulation 4 of this Chapter; |
| (iii) | details of the scantlings of any temporary fittings and where applicable the provisions necessary to meet the requirements of Section I(E) of Part C of this Chapter; |
| (iv) | typical loaded service departure and arrival conditions and where necessary, intermediate worst service conditions; |
| (v) | a worked example for the guidance of the master; |
| (vi) | loading instructions in the form of notes summarizing the requirements of this Chapter. |
| (b) | Information which shall be acceptable to the Administration or to a Contracting Government on behalf of the Administration: |
| (ii) | lightship displacement and the vertical distance from the intersection of the moulded base line and midship section to the centre of gravity (KG); |
| (iii) | table of free surface corrections; |
| (iv) | capacities and centres of gravity. |
